All Guides

How to Align a Table Saw Blade to the Miter Slot

Get to 0.002 inch parallel in under 30 minutes with a dial indicator

Align your table saw blade to the miter slot using a dial indicator. Test procedure, trunnion adjustments for both saw types, 0.002-inch tolerance target.

Trim Router vs Full-Size Router: When Each One Is Enough

The real dividing line is the collet, not the motor. Here's exactly which operations belong to each router type — and when you genuinely need both.

How to Build a Face Frame

Build It Square, Attach It Flat, and Get Your Reveals Right

A face frame is the solid wood front of a cabinet box. Learn standard dimensions, joinery methods, attachment techniques, and multi-cabinet run planning.

How to Spray Two-Part Epoxy

Two-Part Application for Wood

Apply two-part epoxy spray paint to wood — mixing ratios, pot life, spray gun setup, and troubleshooting sagging, fish eyes, and amine blush.

How to Stain Wood Dark

Products, Prep, and Species Guide

Get consistently dark stain results on any wood — choose the right stain type, prep the surface correctly, and avoid blotching on pine and maple.

Cutting Crown Moulding: Flat vs. Nested Method

Spring Angles, Saw Settings, and Gap-Free Corners

Master crown moulding compound miter cuts. Learn spring angles, flat vs. nested methods, exact angle tables, and how to cope inside corners like a pro.

Table Saw Fence Alignment: Setting It Parallel to the Blade

Why Parallel Isn't Always Enough, and How to Measure to 0.002 Inches

Align your table saw rip fence to the miter slot in four steps, with or without a dial indicator. Covers toe-out vs parallel and three fence types.