Router Table

What Is a Miter Joint?

Why They Look Great, Why They Fail, and How to Fix Both

Miter joints hide end grain for clean corners but are structurally weak. Learn the geometry, cutting methods, reinforcement options, and troubleshooting.

• Table Saw
• Miter Saw
• Router Table

Beginner · Updated May 12, 2026

Making Cabinet Doors

From Door Style to Hung and Adjusted

Choose a door style, size it for overlay or inset mounting, build a Shaker door step by step, and hang it with European cup hinges.

• Poplar
• Hard Maple
• Table Saw

Beginner · Updated May 12, 2026

How to Build Raised Panel Doors

How to Build Them from Scratch

Build raised panel cabinet doors step by step — frame sizing, cope-and-stick profiling, panel raising, and assembly with a floating panel that won't crack.

• Router Table
• Table Saw
• Raised Panel Bit

Beginner · Updated May 12, 2026

How to Build a roll-up Tambour Door

How to Build a Tambour Door from Scratch

Learn how to build roll-up tambour cabinet doors: slat dimensions, groove routing, canvas assembly, and troubleshooting in one complete guide.

• Table Saw
• Router
• Router Table

Beginner · Updated May 12, 2026

Router Feed Direction: Which Way to Move (and Remember It)

Right-to-left on a router table; counterclockwise on outside edges; clockwise inside cutouts. The why behind the rule and a memory trick that sticks.

• Router
• Router Table
• Power Tool

Beginner · Updated May 12, 2026

How to Set Up a Router Table Fence (and Stop Drift)

Two-step alignment: bring both fence halves coplanar, then square them to the miter slot. Plus three reasons fences drift, and how to lock them.

• Router Table
• Router
• Power Tool

Beginner · Updated May 12, 2026

Choosing Your First Router Table

Which One to Buy, What Router to Mount, and How to Set It Up

Router tables give you both hands on the wood and consistent results across dozens of pieces. Here's which table, which router, and how to get started.

• Router Table
• Router
• Power Tool

Beginner · Updated May 12, 2026

Router Kickback: Why It Happens and How to Prevent It

Kickback is the bit grabbing the workpiece and throwing it. The cause is almost always feed direction. Three rules eliminate it on table or handheld.

• Router
• Router Table
• Router Bit

Beginner · Updated May 5, 2026

How to Build a Mid Century Modern Coffee Table

Walnut, Tapered Legs, and a Lower Shelf

Design and build a walnut MCM coffee table with storage — proportions, tapered legs, mortise-and-tenon joinery, and an oil finish that lasts decades.

• Black Walnut
• Table Saw
• Router Table

Intermediate · Updated May 12, 2026